Page 2           Easy Wire Earrings with Beads Jewelry Making Project

Step 2:  Wrap one headpin with beads onto each of the three holes at the bottom of the two ear drops.

Step 3:  Connect the drops to your ear wire.  If you will make your own ear wire follow the steps below.

Easy Earrings
 

Step 4:  Position three metal pegs and one Super Peg on a WigJig Cyclops as shown as right.  Use a 1/4" Super Peg if you only have 1/2 hard wire.  Use 5/16" if you have soft wire.  Step by step pictures of the steps used are found here.

Step 5:  Grasp 3-1/2 inches of straight 20G wire with chain nose or bent chain nose pliers about 3/4" from the end.  Bend the wire to make an 85% angle.

Step 6:  Grasp the wire at the bend using your round nose pliers and make a 1/2 of a loop in the wire.   Reposition the wire in the grip of the round nose pliers to complete the loop. 
 

Ear Wire Pattern

 Most, but not all of the jewelry supplies shown here can be purchased in our WigJig store.  We try to have a complete selection of jewelry supplies in our store including chain, wire, glass beads, findings, watches, tools, etc.