|HOME JEWELRY MAKING INSTRUCTIONS WIGJIG UNIVERSITY NEWSLETTER GIFT IDEAS WIGJIG STORE|
|VIEW OUR BEADS BLING BOOKS CHAIN FINDINGS MISC SUPPLIES THREAD JEWELRY TOOLS WATCHES WIRE|
Triangular Jewelry Wire Bail (Continued):
Occasionally you will find a glass bead that has a larger than normal hole and you will want to hang that glass bead as a pendant. You can see that we made a triangular jewelry wire bail for these beads, but used a rounded bottom to hold the beads.
The two glass beads shown at right were made by Louise Erskine. Unfortunately, our pictures don't portray all of the beauty in Louise's beads. Please visit her web site to view better pictures of her work by selecting the link at right and below. You can view other examples of Louise's glass work by selecting here.
Our instructions below show how to make this triangular bail with the rounded bottom.
Step 25: Follow steps 1 through 10 beginning on page 20. When you have completed step 10, your wire should appear as shown at right.
Step 26: Using your bent chain nose pliers, grasp the wire immediately below the triangles on the long wire segment and bend the wire 90 degrees as shown below.
These instructions continue on the next web page.
Prior Page Page 26 Next Page
Return to Beads, Jewelry Making Tools, Beads, Wire and
Jewelry Supplies by WigJig
See our selection or beads, jewelry making supplies, wire and jewelry tools.
All content on this web site is copyrighted© by WigJig®. Questions/Comments?
WigJig is a registered trademark - Last modified: 02/15/2009